Product Description

Rule 800 GPH Bilge Pump 24v

The Next Generation compact, high capacity 800 GPH submersible electric bilge pump. Totally submersible, which is water cooled and TCO (thermal cut-out) protected motor, stainless steel shaft and easy to clean/replace snap-on strainer base.

This pump is extremely energy efficient, draining low current and offer high capacity output all within a very compact housing, designed to fit into the smallest available space.

This pump is non-automatic, meaning it requires a Rule float switch to operate automatically.

Available in 12 or 24 volt.

3 year limited warranty.

• Fully submersible 800 US gallons per hour – 50 litres per minute
• High flow due to optimized impeller to provide greater flow at the same amperage as previous model
• High efficiency, low amp draw ignition protected motor includes true electromagnetic suppression (EMC)
• 16 gauge tin coated copper electrical wiring with silicon infused water blocking feature to stop water wicking down inside the wiring
• Built-in thermal cut-out in the motor provides additional protection for pump & vessel
• Back flow prevention, the pump now includes a removable check valve in the discharge nozzle which reduces the amount of any water draining back from the pump discharge hose into the bilge. Note – Using the check valve will reduce output flow
• Threaded discharge port allows for easier installation and maintenance, hose port is included in each pump
• Hidden air vents in the pump prevents air locking in challenging plumbing installations and helps with the check valve operation
• Compact size – 112mm height x 74mm width x 64mm depth – not including discharge
• 3.4 amp draw @ 12v DC 1.7 amp draw @ 24v DC
• Threaded hose outlet suits 20mm (3/4″) hose. 1 straight port provided.

Spare Parts Available:

SP856 Replacement Strainer base to suit new 800 & 1100 GPH pumps

SP843 Straight threaded port to suit 20mm (3/4″) hose – as supplied with the pump

SP844 Optional 90 degree threaded port to suit 20mm (3/4″) hose

SP845 Optional straight threaded port suits 25mm (1″) hose

SP846 Optional 90 degree threaded port suits 25mm (1″) hose

SP852 Replacement check valve 20mm (3/4″)

SP853 Replacement check valve 25mm (1″)