Akuma 90 Degree Indexable End Mill for 1 APKT1003 Insert, Cutting Dia. .375″, Shank Dia. .500″, 3″ OAL – APPS.10.037.R-S.050

• APP 10 Series
• Regular Length
• Accepts industry standard APKT inserts.
• 11 relief angle to reduce tool pressure.
• Approach Angle 90
• Screw on system for less chip interference.
• Right Hand.
• Shank Type: WELDON
• Maximum Depth of Cut: 0.393″
• Helical cutting edges and high axial rake angles.
• Coolant thru system allows for better chip evacuation and longer tool life with less heat.
• Application: Face Milling, Slotting, Shouldering, Ramping, Helical Milling (Circular Interpolation), & Plunging.
• Use Torx Screw #: AKX-25C
• Use Torx Wrench #: T-08
• Inserts not included.

For More Akuma 90 Degree Indexable End Mills for APKT Inserts Click Here