The Felco C2Wire Cuttershave an intensely hard, long-lasting blade – 10% to 15% harder than the Felco C7, itself renowned for the hardness of its blades. This makes the ergonomic cutter consume much less cutting effort. The smaller handle opening of five inches gives a better fit for smaller hands. The triangular cutting action delivers a progressive cut for wires and cables. The blades squeeze and restrict the cable instead squashing it.

Cutting Capacity: 3.5 mm.

Length: 8 inches.

Weight: 10 oz.

Important Note: The C2s will not cut the 3/8″ strand out of the box. However, they are fairly easy to modify by grinding (you can use a chain grinding wheel but a dremel tool or any like device would do). Grind a small amount off of the tip of each jaw. Just enough for the 3/8th to go into the jaw. We have switched to the C2 rather than the C3 because the C3s can break at the tips on 3/8″ cable.