Product Description

Rule LoPro Bilge Pump Automatic 12volt

The Rule LoPro (low profile) bilge pumps are small enough to fit into tight spaces in the bilge – yet they pack real pumping power at 900 gallons per hour – 3,400 litres per hour – 57 litres per minute!

These pumps include numerous features for ease of installation, ease of use and multiple options for use.

• Up to 900 GPH – 3,400 LPH – 57 litres per minute at open flow
• Up to 634 GPH – 2,400 LPH – 40 litres per minute at 1 metre head
• Up to 418 GPH – 1,582 LPH – 26 litres per minute at 2 metre head
• Maximum head height – 4 metres = 0 flow
• Compact size – 60mm high (with port to the side) 60mm wide (with port upright)
• Length – 195mm
• Fully submersible
• Horizontal or vertical mounting
• Ignition protected – wont create a spark
• Thermal cut-out to prevent overheating if run dry
• Silicone blocked tinned 16 gauge wiring
• Rotating discharge body swivels 180 degree for ease of installation
• Threaded discharge nozzle with multiple hose ports included as standard in the package – 4 different hose ports provided – 1 each 20mm, 25mm & 28mm straight & 1 x 20mm 90 degree elbow
• Straight discharge ports include a nitrile non-return check valve (for use on straight ports only – not to be used on 90 deg port)
• High or low water sensing mode – the pump can be set to start operation at either 33mm or 50mm bilge water height
• Electronic automatic timer mode – The pump can be set to automatically check for water every 2 1/2 minutes – if water is present it will continue to run and pump bilge water. This feature is very handy – however if you leave the boat unattended on a mooring it may run down the battery over time, if you dont have solar panels or a wind generator Etc to constantly charge the battery – in this case set the pump only to high or low mode.
• Pump test mode
• Include manual override 3rd wire – requires a Rule 3 way panel switch RWB23 or RWB107 to operate this feature
• 12 volt 4 amp use a 7.5 amp fuse
• 12 volt DC only – DO NOT run direct off a 240v-12v transformer
• 3 year limited warranty.

Also available:

• Non – Automatic Operation LoPro Pump – RWB515

Spare Parts Available:

RWB5194 Spare hose barb straight 20mm

RWB5195 Spare hose barb 90 degree 20mm

RWB5184 Spare hose barb straight 25mm

RWB5182 Spare hose barb straight 28mm

RWB5197 Replacement non-return check valve to suit 20mm (3/4″)

RWB5198 Replacement non-return check valve to suit 25mm (1″) and 28mm (11/8″).