Product Description

Rule 360 GPH Bilge Pump 12v

The Next Generation compact, submersible 360 GPH electric bilge pump is ideal for use as a bilge or bait pump on smaller boats. Totally submersible, which is water cooled and TCO (thermal cut-out) protected motor, stainless steel shaft and easy to clean/replace strainer base.

This pump is extremely energy efficient, draining low current and offer high capacity output all within a very compact housing, designed to fit into the smallest available space.

This pump is non-automatic, meaning it requires a Rule float switch to operate automatically.

Only available in 12volt.

3 year limited warranty.

• Fully submersible 360 US gallons per hour – 23 litres per minute @ 12v
• High flow due to optimized impeller to provide greater flow at the same amperage as previous model
• High efficiency, low amp draw ignition protected motor includes true electromagnetic suppression (EMC)
• 16 gauge tin coated copper electrical wiring with silicon infused water blocking feature to stop water wicking down inside the wiring
• Built-in thermal cut-out in the motor provides additional protection for pump & vessel
• Back flow prevention, the pump now includes a removable check valve in the discharge nozzle which reduces the amount of any water draining back from the pump discharge hose into the bilge. Note – Using the check valve will reduce output flow
• Threaded discharge port allows for easier installation and maintenance, hose port is included in each pump
• Hidden air vents in the pump prevents air locking in challenging plumbing installations and helps with the check valve operation
• Compact size – 99mm height x 74mm width x 64mm depth – not including discharge
• 2.1 amp draw @12v DC
• Threaded hose outlet suits 20mm (3/4″) hose. 1 straight port provided.

Spare Parts Available:

SP855 Replacement Strainer base to suit new 360 & 500GPH pumps

SP840 Straight threaded port to suit 20mm 3/4″) hose – as supplied with the pump

SP841 Optional 90 degree threaded port to suit 20mm (3/4″) hose

SP842 Optional straight threaded port suits 25mm (1″) hose

SP851 Replacement check valve 20mm (3/4″)