Product Description

Rule-Mate Automatic 1100 GPH Bilge Pump 24v

All new versions of the Rule-Mate fully automatic submersible bilge pumps offering more compact size with high performance & reliability. The RULE brand builds on more than 50 years of operational experience, innovation, design excellence & application expertise to offer modern solutions to today’s boat owners and boat builders. The NEW Rule-Mate Automatic bilge pumps are packed with many improved and additional features that are not available in other brands of bilge pumps.

All in one bilge pump and switch – no need for independent float switch.

The innovative design incorporates the bilge pump and water sensor in one single housing – save space!

Rule’s unique spongeability feature leaves the bilge drier then ever. When water in the bilge reached a certain height the solid state sensor automatically activates and the pump runs until the water is pumped out, reducing boat weight, saving fuel and minimizing bilge odour.

Pump check feature – simply touch the pump check button on the pump, hold for a few seconds to test cycle the pump.

Pump has a threaded discharge port with O ring seal and are supplied with both 90 degree and straight hose port – 25mm and 28mm.

Available in 12 or 24 volt.

3 year limited warranty.

• 1100GPH at open flow / 790GPH at 1 metre head
• More compact size – only 2/3 the size of the previous versions
• Auto-sense intelligence fully automatic water level sensing
• Fully automatic pump in 1 common compact housing
• Pump and sensor are internally common wired for easy installation
• No battery drain other than when the pump is in use
• Optimized impeller design gives up to 10% higher ow than previous versions – at the same amperage
• Built-in thermal cut-out (TCO) to protect the pump & the vessel
• Supplied with back ow prevention – check valve in outlet port
• Anti-Airlock design has hidden air vents in the pump body
• Safety back-up operating mode prevents continuous running if the sensor or impeller is fouled by debris
• Pump check feature – touch and hold for 5 seconds on the “touch here” button on the pump casing – to instantly check the operation of the pump
• Removable strainer to access impeller area to clear any debris
• 3rd wire allows for manual over-ride using a Rule switch panel
• Overall dimensions including straight hose port 190mm Length x 80mm Wide x 115mm Height
• 2 amp draw @ 24v DC
• 4amp fuse

Spare Parts Available:

SP856 Replacement Snap-On Strainer

SP845 Straight threaded port suits 25mm (1″) hose (as supplied with pump)

SP846 90 degree threaded port suits 25mm (1″) hose

SP847 Straight threaded port suits 28mm (11/8″) hose (as supplied with pump)

SP848 90 degree threaded port suits 28mm (11/8″)

SP853 Replacement check valve 25mm (1″)

SP854 Replacement check valve 28mm (11/8″)